On Sun, Apr 10, 2011 at 12:08 AM, Ross Wakelin <ross.wakelin@gmail.com> wrote:
Bullet M5HP
uci show
dhcp.@dnsmasq[0]=dnsmasq
dhcp.@dnsmasq[0].domainneeded=1
dhcp.@dnsmasq[0].boguspriv=1
dhcp.@dnsmasq[0].filterwin2k=0
dhcp.@dnsmasq[0].localise_queries=1
dhcp.@dnsmasq[0].rebind_protection=1
dhcp.@dnsmasq[0].rebind_localhost=1
dhcp.@dnsmasq[0].local=/lan/
dhcp.@dnsmasq[0].domain=lan
dhcp.@dnsmasq[0].expandhosts=1
dhcp.@dnsmasq[0].nonegcache=0
dhcp.@dnsmasq[0].authoritative=1
dhcp.@dnsmasq[0].readethers=1
dhcp.@dnsmasq[0].leasefile=/tmp/dhcp.leases
dhcp.@dnsmasq[0].resolvfile=/tmp/resolv.conf.auto
dhcp.lan=dhcp
dhcp.lan.interface=lan
dhcp.lan.start=100
dhcp.lan.limit=150
dhcp.lan.leasetime=12h
dhcp.lan.ignore=0
dhcp.wan=dhcp
dhcp.wan.interface=wan
dhcp.wan.ignore=1
dropbear.@dropbear[0]=dropbear
dropbear.@dropbear[0].PasswordAuth=on
dropbear.@dropbear[0].RootPasswordAuth=on
dropbear.@dropbear[0].Port=22
firewall.@defaults[0]=defaults
firewall.@defaults[0].syn_flood=1
firewall.@defaults[0].input=ACCEPT
firewall.@defaults[0].output=ACCEPT
firewall.@defaults[0].forward=REJECT
firewall.@zone[0]=zone
firewall.@zone[0].name=lan
firewall.@zone[0].input=ACCEPT
firewall.@zone[0].output=ACCEPT
firewall.@zone[0].forward=ACCEPT
firewall.@zone[0].network=lan
firewall.@zone[1]=zone
firewall.@zone[1].name=wan
firewall.@zone[1].input=REJECT
firewall.@zone[1].output=ACCEPT
firewall.@zone[1].forward=REJECT
firewall.@zone[1].masq=1
firewall.@zone[1].mtu_fix=1
firewall.@zone[1].network=wan
firewall.@rule[0]=rule
firewall.@rule[0].src=wan
firewall.@rule[0].proto=udp
firewall.@rule[0].dest_port=68
firewall.@rule[0].target=ACCEPT
firewall.@rule[0].family=ipv4
firewall.@rule[1]=rule
firewall.@rule[1].src=wan
firewall.@rule[1].proto=icmp
firewall.@rule[1].icmp_type=echo-request
firewall.@rule[1].target=ACCEPT
firewall.@include[0]=include
firewall.@include[0].path=/etc/firewall.user
firewall.@zone[2]=zone
firewall.@zone[2].name=mesh
firewall.@zone[2].input=ACCEPT
firewall.@zone[2].output=ACCEPT
firewall.@zone[2].forward=ACCEPT
firewall.@zone[2].network=
firewall.@forwarding[0]=forwarding
firewall.@forwarding[0].dest=mesh
firewall.@forwarding[0].src=lan
firewall.@forwarding[1]=forwarding
firewall.@forwarding[1].dest=lan
firewall.@forwarding[1].src=mesh
luci.main=core
luci.main.lang=auto
luci.main.mediaurlbase=/luci-static/openwrt.org
luci.main.resourcebase=/luci-static/resources
luci.flash_keep=extern
luci.flash_keep.uci=/etc/config/
luci.flash_keep.dropbear=/etc/dropbear/
luci.flash_keep.openvpn=/etc/openvpn/
luci.flash_keep.passwd=/etc/passwd
luci.flash_keep.opkg=/etc/opkg.conf
luci.flash_keep.firewall=/etc/firewall.user
luci.flash_keep.uploads=/lib/uci/upload/
luci.languages=internal
luci.languages.en=English
luci.sauth=internal
luci.sauth.sessionpath=/tmp/luci-sessions
luci.sauth.sessiontime=3600
luci.ccache=internal
luci.ccache.enable=1
luci.themes=internal
luci.themes.OpenWrt=/luci-static/openwrt.org
network.loopback=interface
network.loopback.ifname=lo
network.loopback.proto=static
network.loopback.ipaddr=127.0.0.1
network.loopback.netmask=255.0.0.0
network.lan=interface
network.lan.ifname=eth0
network.lan.type=bridge
network.lan.proto=static
network.lan.netmask=255.255.255.0
network.lan.ipaddr=10.1.1.1
network.mesh=interface
network.mesh.profile=bulk
network.mesh.rc=minstrel
network.mesh.ls=fcfs
network.mesh.metric=wcett
network.mesh.prefix=6
network.mesh.period=10000
network.mesh.tau=100000
network.mesh.debug=true
network.mesh.proto=wing
ntpclient.@ntpserver[0]=ntpserver
ntpclient.@ntpserver[0].hostname=0.openwrt.pool.ntp.org
ntpclient.@ntpserver[0].port=123
ntpclient.@ntpserver[1]=ntpserver
ntpclient.@ntpserver[1].hostname=1.openwrt.pool.ntp.org
ntpclient.@ntpserver[1].port=123
ntpclient.@ntpserver[2]=ntpserver
ntpclient.@ntpserver[2].hostname=2.openwrt.pool.ntp.org
ntpclient.@ntpserver[2].port=123
ntpclient.@ntpserver[3]=ntpserver
ntpclient.@ntpserver[3].hostname=3.openwrt.pool.ntp.org
ntpclient.@ntpserver[3].port=123
ntpclient.@ntpdrift[0]=ntpdrift
ntpclient.@ntpdrift[0].freq=0
ntpclient.@ntpclient[0]=ntpclient
ntpclient.@ntpclient[0].interval=600
system.@system[0]=system
system.@system[0].hostname=OpenWrt
system.@system[0].timezone=UTC
system.@rdate[0]=rdate
system.@rdate[0].interface=wan
timeserver.@timeserver[0]=timeserver
timeserver.@timeserver[0].hostname=ptbtime1.ptb.de
timeserver.@timeserver[1]=timeserver
timeserver.@timeserver[1].hostname=time-a.nist.gov
timeserver.@timeserver[2]=timeserver
timeserver.@timeserver[2].hostname=ntp.xs4all.nl
timeserver.@timeserver[3]=timeserver
timeserver.@timeserver[3].hostname=ptbtime2.ptb.de
timeserver.@timeserver[4]=timeserver
timeserver.@timeserver[4].hostname=time-b.nist.gov
ucitrack.@network[0]=network
ucitrack.@network[0].init=network
ucitrack.@network[0].affects=dhcp radvd
ucitrack.@wireless[0]=wireless
ucitrack.@wireless[0].affects=network
ucitrack.@firewall[0]=firewall
ucitrack.@firewall[0].init=firewall
ucitrack.@firewall[0].affects=luci-splash qos miniupnpd
ucitrack.@olsr[0]=olsr
ucitrack.@olsr[0].init=olsrd
ucitrack.@dhcp[0]=dhcp
ucitrack.@dhcp[0].init=dnsmasq
ucitrack.@dropbear[0]=dropbear
ucitrack.@dropbear[0].init=dropbear
ucitrack.@httpd[0]=httpd
ucitrack.@httpd[0].init=httpd
ucitrack.@fstab[0]=fstab
ucitrack.@fstab[0].init=fstab
ucitrack.@qos[0]=qos
ucitrack.@qos[0].init=qos
ucitrack.@system[0]=system
ucitrack.@system[0].init=led
ucitrack.@system[0].affects=luci_statistics
ucitrack.@luci_splash[0]=luci_splash
ucitrack.@luci_splash[0].init=luci_splash
ucitrack.@upnpd[0]=upnpd
ucitrack.@upnpd[0].init=miniupnpd
ucitrack.@ntpclient[0]=ntpclient
ucitrack.@ntpclient[0].init=ntpclient
ucitrack.@samba[0]=samba
ucitrack.@samba[0].init=samba
ucitrack.@tinyproxy[0]=tinyproxy
ucitrack.@tinyproxy[0].init=tinyproxy
uhttpd.main=uhttpd
uhttpd.main.listen_http=0.0.0.0:80
uhttpd.main.listen_https=0.0.0.0:443
uhttpd.main.home=/www
uhttpd.main.rfc1918_filter=1
uhttpd.main.cert=/etc/uhttpd.crt
uhttpd.main.key=/etc/uhttpd.key
uhttpd.main.cgi_prefix=/cgi-bin
uhttpd.main.script_timeout=60
uhttpd.main.network_timeout=30
uhttpd.main.tcp_keepalive=1
uhttpd.px5g=cert
uhttpd.px5g.days=730
uhttpd.px5g.bits=1024
uhttpd.px5g.country=DE
uhttpd.px5g.state=Berlin
uhttpd.px5g.location=Berlin
uhttpd.px5g.commonname=OpenWrt
wireless.phy0=wifi-device
wireless.phy0.phy=phy0
wireless.phy0.type=mac80211
wireless.phy0.hwmode=11na
wireless.phy0.channel=40
wireless.phy0.country=US
wireless.@wifi-iface[0]=wifi-iface
wireless.@wifi-iface[0].device=phy0
wireless.@wifi-iface[0].mode=monitor
On 10 April 2011 15:57, Outback Dingo <outbackdingo@gmail.com> wrote:
> this is a Bullet M5 correct ? built on OpenWRT using the ar71xx target for
> Ubiquiti devices ?
> Ive got Pico M2s running here fine which is the same image as the Bullet M5s
> anyway to get access to one of these devices from remote, somethings not
> right
> can you paste uci show from the device to me
> On Sat, Apr 9, 2011 at 11:51 PM, Ross Wakelin <ross.wakelin@gmail.com>
> wrote:
>>
>> Yep, and even rebooted the boxes
>>
>>
>> On 10 April 2011 15:38, Outback Dingo <outbackdingo@gmail.com> wrote:
>> > So your /etc/config/wireless looks exactly like this below ? with
>> > nothing
>> > else added?
>> > and you ran wifi start, then ifup mesh after you changed the
>> > configuration
>> > config 'wifi-device' 'phy0'
>> > option 'phy' 'phy0'
>> > option 'type' 'mac80211'
>> > option 'channel' '40'
>> > option 'country' 'US'
>> > option 'hwmode' '11na'
>> > config 'wifi-iface'
>> > option 'device' 'phy0'
>> > option 'mode' 'monitor'
>> >
>> > On Sat, Apr 9, 2011 at 11:25 PM, Ross Wakelin <ross.wakelin@gmail.com>
>> > wrote:
>> >>
>> >> I have made those changes to the wireless config file, sorry, no
>> >> change in connection.
>> >>
>> >> I am still seeing the following lines in the system log during the
>> >> boot up, and they look suspicious to me:
>> >>
>> >> Mar 28 01:49:06 OpenWrt user.info sysinit: ifconfig: SIOCSIFHWADDR:
>> >> Invalid argument
>> >> Mar 28 01:49:11 OpenWrt user.info sysinit: ifconfig: SIOCSIFADDR: No
>> >> such
>> >> device
>> >> Mar 28 01:49:11 OpenWrt kern.info kernel: device wing-mesh entered
>> >> promiscuous mode
>> >> Mar 28 01:49:11 OpenWrt user.notice ifup: Enabling Router
>> >> Solicitations on mesh (wing-mesh)
>> >>
>> >> Its almost as if the low level wing/click stack can't get a connect to
>> >> the wireless device.
>> >> Is there any more debug I can turn on?
>> >>
>> >>
>> >>
>> >> On 10 April 2011 12:25, Outback Dingo <outbackdingo@gmail.com> wrote:
>> >> >
>> >> >
>> >> > On Sat, Apr 9, 2011 at 6:32 PM, Ross Wakelin <ross.wakelin@gmail.com>
>> >> > wrote:
>> >> >>
>> >> >> Hi,
>> >> >>
>> >> >> at this time, ifconfig show no packets transmitted or received on
>> >> >> either the wlan0 or
>> >> >> the wing-mesh interfaces
>> >> >>
>> >> >> As requested, here is the config and debug info...
>> >> >>
>> >> >> OpenWrt version trunk 26507
>> >> >> Hardware is Ubiquity Bullet M
>> >> >> Kernel 2.6.37.6
>> >> >> kmod-ath9k version 2.6.37.6+2011-04-06-2
>> >> >> kmod-tun version 2.6.37.6-1
>> >> >> wing version 20110329-2
>> >> >>
>> >> >> wing-mesh-log:
>> >> >> warning: added 2 Align elements
>> >> >> expensive Packet::push; have 10 wanted 12
>> >> >> expensive Packet::push; have 10 wanted 12
>> >> >> expensive Packet::push; have 10 wanted 12
>> >> >> expensive Packet::push; have 10 wanted 12
>> >> >> expensive Packet::push; have 10 wanted 12
>> >> >> wr/gw :: WINGGatewaySelector :: start_ad :: hna 10.1.2.0
>> >> >> 255.255.255.0
>> >> >> 6.92.125.106 seq 29
>> >> >> wr/gw :: WINGGatewaySelector :: start_ad :: hna 10.1.2.0
>> >> >> 255.255.255.0
>> >> >> 6.92.125.106 seq 29
>> >> >> wr/gw :: WINGGatewaySelector :: start_ad :: hna 10.1.2.0
>> >> >> 255.255.255.0
>> >> >> 6.92.125.106 seq 29
>> >> >> wr/gw :: WINGGatewaySelector :: start_ad :: hna 10.1.2.0
>> >> >> 255.255.255.0
>> >> >> 6.92.125.106 seq 29
>> >> >> wr/gw :: WINGGatewaySelector :: start_ad :: hna 10.1.2.0
>> >> >> 255.255.255.0
>> >> >> 6.92.125.106 seq 29
>> >> >> wr/gw :: WINGGatewaySelector :: start_ad :: hna 10.1.2.0
>> >> >> 255.255.255.0
>> >> >> 6.92.125.106 seq 29
>> >> >> wr/gw :: WINGGatewaySelector :: start_ad :: hna 10.1.2.0
>> >> >> 255.255.255.0
>> >> >> 6.92.125.106 seq 29
>> >> >> wr/gw :: WINGGatewaySelector :: start_ad :: hna 10.1.2.0
>> >> >> 255.255.255.0
>> >> >> 6.92.125.106 seq 29
>> >> >> wr/gw :: WINGGatewaySelector :: start_ad :: hna 10.1.2.0
>> >> >> 255.255.255.0
>> >> >> 6.92.125.106 seq 29
>> >> >> wr/gw :: WINGGatewaySelector :: start_ad :: hna 10.1.2.0
>> >> >> 255.255.255.0
>> >> >> 6.92.125.106 seq 29
>> >> >> wr/gw :: WINGGatewaySelector :: start_ad :: hna 10.1.2.0
>> >> >> 255.255.255.0
>> >> >> 6.92.125.106 seq 29
>> >> >> wr/gw :: WINGGatewaySelector :: start_ad :: hna 10.1.2.0
>> >> >> 255.255.255.0
>> >> >> 6.92.125.106 seq 29
>> >> >> wr/gw :: WINGGatewaySelector :: start_ad :: hna 10.1.2.0
>> >> >> 255.255.255.0
>> >> >> 6.92.125.106 seq 29
>> >> >> wr/gw :: WINGGatewaySelector :: start_ad :: hna 10.1.2.0
>> >> >> 255.255.255.0
>> >> >> 6.92.125.106 seq 29
>> >> >> wr/gw :: WINGGatewaySelector :: start_ad :: hna 10.1.2.0
>> >> >> 255.255.255.0
>> >> >> 6.92.125.106 seq 29
>> >> >> wr/gw :: WINGGatewaySelector :: start_ad :: hna 10.1.2.0
>> >> >> 255.255.255.0
>> >> >> 6.92.125.106 seq 29
>> >> >> wr/gw :: WINGGatewaySelector :: start_ad :: hna 10.1.2.0
>> >> >> 255.255.255.0
>> >> >> 6.92.125.106 seq 29
>> >> >> wr/gw :: WINGGatewaySelector :: start_ad :: hna 10.1.2.0
>> >> >> 255.255.255.0
>> >> >> 6.92.125.106 seq 29
>> >> >> wr/gw :: WINGGatewaySelector :: start_ad :: hna 10.1.2.0
>> >> >> 255.255.255.0
>> >> >> 6.92.125.106 seq 29
>> >> >>
>> >> >> wing-mesh.click:
>> >> >> rates_1 :: AvailableRates(DEFAULT 12 18 24 36 48 72 96 108,
>> >> >> 00:15:6D:5C:7D:6A 12 18 24 36 48 72 96 108);
>> >> >> channels_1 :: AvailableChannels(DEFAULT 5180 5200 5220 5240 5260
>> >> >> 5280
>> >> >> 5300 5320, 00:15:6D:5C:7D:6A 5180 5200 5220 5240 5260 5280 5300
>> >> >> 5320);
>> >> >> dev_1 :: DevInfo(ETH 00:15:6D:5C:7D:6A, IFACE 1, CHANNEL 5200,
>> >> >> CHANNELS channels_1, RATES rates_1);
>> >> >> lt :: LinkTableMulti(IP 6.92.125.106, IFACES " 1", BETA 80);
>> >> >> metric :: WINGETTMetric(LT lt);
>> >> >> arp :: ARPTableMulti();
>> >> >>
>> >> >> elementclass EtherSplit {
>> >> >> input -> cl :: Classifier(6/00156D5C7D6A);
>> >> >> cl[0] -> [0] output;
>> >> >> }
>> >> >>
>> >> >> elementclass LinkStat {
>> >> >> $debug|
>> >> >> input -> ps :: PaintSwitch();
>> >> >> es_1 :: WINGLinkStat(IP 6.92.125.106,
>> >> >> DEV dev_1,
>> >> >> PERIOD 10000,
>> >> >> TAU 100000,
>> >> >> PROBES "12 60 12 1500 18 1500 24
>> >> >> 1500 36 1500 48 1500 72 1500 96 1500 108 1500",
>> >> >> ARP arp,
>> >> >> LT lt,
>> >> >> METRIC metric,
>> >> >> DEBUG $debug);
>> >> >> ps[0] -> es_1 -> output;
>> >> >> }
>> >> >>
>> >> >> elementclass WingRouter {
>> >> >> $ip, $nm, $rate, $debug|
>> >> >>
>> >> >>
>> >> >> outgoing :: SetTXRate($rate)
>> >> >> -> [0] output
>> >> >>
>> >> >>
>> >> >> es :: LinkStat($debug);
>> >> >>
>> >> >>
>> >> >> gw :: WINGGatewaySelector(IP $ip,
>> >> >> PERIOD 15000,
>> >> >> EXPIRE 30000,
>> >> >> LT lt,
>> >> >> ARP arp,
>> >> >> DEBUG $debug);
>> >> >>
>> >> >>
>> >> >> track_flows :: WINGTrackFlows();
>> >> >>
>> >> >>
>> >> >> set_gateway :: WINGSetGateway(SEL gw);
>> >> >>
>> >> >>
>> >> >> forwarder :: WINGForwarder(IP $ip,
>> >> >> ARP arp,
>> >> >> DEBUG $debug);
>> >> >>
>> >> >>
>> >> >> querier :: WINGQuerier(QUERY_WAIT 5,
>> >> >> TIME_BEFORE_SWITCH 5,
>> >> >> IP $ip,
>> >> >> ARP arp,
>> >> >> LT lt,
>> >> >> DEBUG $debug);
>> >> >>
>> >> >>
>> >> >> query_forwarder :: WINGMetricFlood(IP $ip,
>> >> >> LT lt,
>> >> >> ARP arp,
>> >> >> DEBUG $debug);
>> >> >>
>> >> >>
>> >> >> query_responder :: WINGQueryResponder(IP $ip,
>> >> >> LT lt,
>> >> >> ARP arp,
>> >> >> DEBUG $debug);
>> >> >>
>> >> >>
>> >> >> gw_responder :: WINGGatewayResponder(IP $ip,
>> >> >> PERIOD 15000,
>> >> >> SEL gw,
>> >> >> LT lt,
>> >> >> RESPONDER query_responder,
>> >> >> DEBUG $debug);
>> >> >>
>> >> >>
>> >> >> gw -> outgoing;
>> >> >> gw_responder -> outgoing;
>> >> >> query_responder -> outgoing;
>> >> >> query_forwarder -> outgoing;
>> >> >>
>> >> >>
>> >> >> query_forwarder [1] -> [0] query_responder;
>> >> >>
>> >> >>
>> >> >> input [1]
>> >> >> -> host_cl :: IPClassifier(dst net $ip mask $nm, -)
>> >> >> -> querier
>> >> >> -> [1] output;
>> >> >>
>> >> >>
>> >> >> host_cl [1] -> set_gateway -> [0] track_flows [0] -> querier;
>> >> >>
>> >> >>
>> >> >> forwarder[0]
>> >> >> -> dt ::DecIPTTL
>> >> >> -> [1] output;
>> >> >>
>> >> >>
>> >> >> dt[1]
>> >> >> -> ICMPError($ip, timeexceeded, 0)
>> >> >> -> querier;
>> >> >>
>> >> >>
>> >> >> querier [1] -> [0] query_forwarder;
>> >> >> es -> SetTimestamp() -> [0] output;
>> >> >>
>> >> >>
>> >> >> forwarder[1] // IP packets to me
>> >> >> -> WINGStripHeader()
>> >> >> -> CheckIPHeader(CHECKSUM false)
>> >> >> -> from_gw_cl :: IPClassifier(src net $ip mask $nm, -)
>> >> >> -> [2] output;
>> >> >>
>> >> >>
>> >> >> from_gw_cl [1] -> [1] track_flows [1] -> [2] output;
>> >> >>
>> >> >>
>> >> >> input [0]
>> >> >> -> ncl :: Classifier(15/01 , // forwarder
>> >> >> 15/02 , // queries
>> >> >> 15/03 , // replies
>> >> >> 15/04 , // es
>> >> >> 15/05 , // gw
>> >> >> );
>> >> >>
>> >> >>
>> >> >> ncl[0] -> forwarder;
>> >> >> ncl[1] -> [1] query_forwarder;
>> >> >> ncl[2] -> [1] query_responder;
>> >> >> ncl[3] -> es;
>> >> >> ncl[4] -> gw;
>> >> >>
>> >> >> }
>> >> >>
>> >> >> elementclass RateControl {
>> >> >> $rate, $rates|
>> >> >>
>> >> >> rate_control :: Minstrel(OFFSET 4, RT $rates);
>> >> >>
>> >> >> input -> rate_control -> output;
>> >> >> input [1] -> [1] rate_control [1] -> [1] output;
>> >> >>
>> >> >> };
>> >> >>
>> >> >> elementclass LinkScheduler {
>> >> >> $lt, $arp|
>> >> >>
>> >> >> input -> FullNoteQueue(10) -> output;
>> >> >>
>> >> >> };
>> >> >>
>> >> >> control :: ControlSocket("TCP", 7777);
>> >> >>
>> >> >> err :: WifiDupeFilter()
>> >> >> -> WifiDecap()
>> >> >> -> WINGCheckHeader()
>> >> >> -> WINGRouteResponder(IP 6.92.125.106, LT lt, ARP arp, DEBUG true)
>> >> >> -> Discard();
>> >> >>
>> >> >> // has one input and one output
>> >> >> // takes and spits out ip packets
>> >> >> elementclass LinuxIPHost {
>> >> >> $dev, $ip, $nm|
>> >> >> input -> KernelTun($ip/$nm, MTU 1500, DEVNAME $dev)
>> >> >> -> CheckIPHeader(CHECKSUM false)
>> >> >> -> output;
>> >> >> }
>> >> >>
>> >> >> elementclass SniffDevice {
>> >> >> $device|
>> >> >> from_dev :: FromDevice($device, PROMISC false, OUTBOUND true,
>> >> >> SNIFFER
>> >> >> false)
>> >> >> -> output;
>> >> >> input -> to_dev :: ToDevice($device);
>> >> >> }
>> >> >>
>> >> >> wr :: WingRouter (6.92.125.106, 255.0.0.0, 12, true);
>> >> >>
>> >> >> linux_ip_host :: LinuxIPHost(wing-mesh, 6.92.125.106, 255.0.0.0) ->
>> >> >> [1]
>> >> >> wr;
>> >> >>
>> >> >> rc_split :: EtherSplit();
>> >> >> sl_split :: EtherSplit();
>> >> >>
>> >> >> wr [0] -> WINGSetHeader() -> sl_split; // queries, replies,
>> >> >> bcast_stats
>> >> >> wr [1] -> WINGSetHeader() -> rc_split;
>> >> >> wr [2] -> linux_ip_host;
>> >> >>
>> >> >> sniff_dev_1 :: SniffDevice(wlan0);
>> >> >> rc_1 :: RateControl(12, rates_1);
>> >> >> ls_1 :: LinkScheduler(lt, arp);
>> >> >> outgoing_1 :: PrioSched()
>> >> >> -> SetTXPower(POWER 60)
>> >> >> -> RadiotapEncap()
>> >> >> -> sniff_dev_1;
>> >> >>
>> >> >> sl_split[0] -> FullNoteQueue() -> WifiEncap(0x0, 00:00:00:00:00:00)
>> >> >> ->
>> >> >> [0] outgoing_1;
>> >> >> rc_split[0] -> ls_1 -> WifiEncap(0x0, 00:00:00:00:00:00) -> rc_1 ->
>> >> >> [1] outgoing_1;
>> >> >>
>> >> >> cl :: Classifier(12/06AA) // this protocol's ethertype
>> >> >> -> WINGCheckHeader()
>> >> >> -> wr;
>> >> >>
>> >> >> sniff_dev_1
>> >> >> -> RadiotapDecap
>> >> >> -> FilterPhyErr()
>> >> >> -> Classifier(0/08%0c) //data
>> >> >> -> tx_filter_1 :: FilterTX()
>> >> >> -> WifiDupeFilter()
>> >> >> -> WifiDecap()
>> >> >> -> HostEtherFilter(00:15:6D:5C:7D:6A, DROP_OTHER true, DROP_OWN
>> >> >> true)
>> >> >> -> Paint(0)
>> >> >> -> cl;
>> >> >>
>> >> >> tx_filter_1[1] -> [1] rc_1 [1] -> err;
>> >> >>
>> >> >> Section of the system log, showing initial startup of the mesh:
>> >> >>
>> >> >> Mar 27 02:48:06 OpenWrt user.info sysinit: ifconfig: SIOCSIFHWADDR:
>> >> >> Invalid argument
>> >> >> Mar 27 02:48:06 OpenWrt user.notice mesh: No raw interfaces
>> >> >> available.
>> >> >> Exiting.
>> >> >> Mar 27 02:48:11 OpenWrt user.info sysinit: ifconfig: SIOCSIFADDR: No
>> >> >> such
>> >> >> device
>> >> >> Mar 27 02:48:11 OpenWrt kern.info kernel: device wing-mesh entered
>> >> >> promiscuous mode
>> >> >> Mar 27 02:48:12 OpenWrt user.notice ifup: Enabling Router
>> >> >> Solicitations on mesh (wing-mes
>> >> >> h)
>> >> >>
>> >> >> network config file:
>> >> >> config 'interface' 'loopback'
>> >> >> option 'ifname' 'lo'
>> >> >> option 'proto' 'static'
>> >> >> option 'ipaddr' '127.0.0.1'
>> >> >> option 'netmask' '255.0.0.0'
>> >> >>
>> >> >> config 'interface' 'lan'
>> >> >> option 'ifname' 'eth0'
>> >> >> option 'proto' 'static'
>> >> >> option 'ipaddr' '192.168.1.1'
>> >> >> option 'netmask' '255.255.255.0'
>> >> >>
>> >> >> config 'interface' 'mesh'
>> >> >> option 'profile' 'bulk'
>> >> >> option 'rc' 'minstrel'
>> >> >> option 'ls' 'fcfs'
>> >> >> option 'metric' 'wcett'
>> >> >> option 'prefix' '6'
>> >> >> option 'period' '10000'
>> >> >> option 'tau' '100000'
>> >> >> option 'debug' 'true'
>> >> >> option 'proto' 'wing'
>> >> >>
>> >> >> wireless config file:
>> >> >>
>> >> >> config 'wifi-device' 'radio0'
>> >> >> option 'type' 'mac80211'
>> >> >> option 'macaddr' '00:15:6d:5c:7d:6a'
>> >> >> option 'hwmode' '11na'
>> >> >> option 'htmode' 'HT20'
>> >> >> list 'ht_capab' 'SHORT-GI-40'
>> >> >> list 'ht_capab' 'TX-STBC'
>> >> >> list 'ht_capab' 'RX-STBC1'
>> >> >> list 'ht_capab' 'DSSS_CCK-40'
>> >> >> option 'disabled' '0'
>> >> >> option 'channel' '40'
>> >> >> option 'txpower' '17'
>> >> >> option 'country' 'US'
>> >> >>
>> >> >> config 'wifi-iface'
>> >> >> option 'device' 'radio0'
>> >> >> option 'ssid' 'OpenWrt'
>> >> >> option 'network' 'mesh'
>> >> >> option 'mode' 'monitor'
>> >> >>
>> >> >>
>> >> >
>> >> > This is a Bullet M5 ? try this config on Both sides for wireless,
>> >> > its
>> >> > what
>> >> > im using
>> >> >
>> >> > config 'wifi-device' 'phy0'
>> >> > option 'phy' 'phy0'
>> >> > option 'type' 'mac80211'
>> >> > option 'channel' '40'
>> >> > option 'country' 'US'
>> >> > option 'hwmode' '11ng'
>> >> > config 'wifi-iface'
>> >> > option 'device' 'phy0'
>> >> > option 'mode' 'monitor'
>> >> >
>> >> >
>> >> >
>> >> >>
>> >> >> On 9 April 2011 20:13, Roberto Riggio
>> >> >> <roberto.riggio@create-net.org>
>> >> >> wrote:
>> >> >> > Hi,
>> >> >> >
>> >> >> > I need a few more info to pinpoint the problem. Could you provide
>> >> >> > me
>> >> >> > with
>> >> >> > the wireless and network configuration file. Plus I will also need
>> >> >> > the
>> >> >> > the
>> >> >> > wing-mesh.log
>> >> >> > file and the /tmp/wing-mesh.click file.
>> >> >> >
>> >> >> > If you want to use the latest snapshot you could checkput the wing
>> >> >> > feed
>> >> >> > for
>> >> >> > openwrt:
>> >> >> >
>> >> >> > src-svn wing http://gforge.create-net.org/svn/openwrt-pkgs/trunk
>> >> >> >
>> >> >> > this should be appened to the feed.conf file in the openwrt
>> >> >> > directory.
>> >> >> > Also
>> >> >> > remember to
>> >> >> > run:
>> >> >> >
>> >> >> > ./script/feed -p wing wing
>> >> >> >
>> >> >> > In order to install the package from the wing feed.
>> >> >> >
>> >> >> > Thanks
>> >> >> > R.
>> >> >> >
>> >> >> > Il 09/04/2011 02:18, Ross Wakelin ha scritto:
>> >> >> >>
>> >> >> >> Oops, finger trouble.
>> >> >> >>
>> >> >> >> Anyway, I might be making progress with these devices.
>> >> >> >>
>> >> >> >> Wing still fails, but in the wing log I now see:
>> >> >> >> ToDevice(wlan0) send: No such device or address.
>> >> >> >>
>> >> >> >> and in the wlan0 log I get:
>> >> >> >> wlan0.click.174: While initializing 'linux_ip_host/KernelTun@1 ::
>> >> >> >> KernelTun' : warning: Linux universal tun failed: Invalid
>> >> >> >> argument
>> >> >> >> Router could not be initialized!
>> >> >> >>
>> >> >> >> So it looks like its trying to bring up the tunnel interface and
>> >> >> >> failing.
>> >> >> >> So again, as I mentioned in the post that did not go to all the
>> >> >> >> list
>> >> >> >> (sorry), what versions/releases are people using that do play
>> >> >> >> happily
>> >> >> >> together?
>> >> >> >>
>> >> >> >> Thanks
>> >> >> >>
>> >> >> >>
>> >> >> >> On 9 April 2011 11:46, Paul Adams<paul@pauladamsit.com> wrote:
>> >> >> >>>
>> >> >> >>> Hey Ross,
>> >> >> >>>
>> >> >> >>> It would seem you sent this message to me only, not to the
>> >> >> >>> mailing
>> >> >> >>> list.
>> >> >> >>>
>> >> >> >>> I'm just starting out - looking for a device to use to learn
>> >> >> >>> WING.
>> >> >> >>>
>> >> >> >>>
>> >> >> >>> I already have a working SMESH network using WRT54GL devices.
>> >> >> >>> Voice
>> >> >> >>> works fine but it is limited. WING seems a much better
>> >> >> >>> solution.
>> >> >> >>>
>> >> >> >>>
>> >> >> >>> Regards
>> >> >> >>>
>> >> >> >>> Paul Adams
>> >> >> >>>
>> >> >> >>>
>> >> >> >>> On Fri, 04/08/2011 at 3:19pm, "Ross
>> >> >> >>> Wakelin"<ross.wakelin@gmail.com>
>> >> >> >>> wrote:
>> >> >> >>>>
>> >> >> >>>> Hi everyone
>> >> >> >>>>
>> >> >> >>>> I've spent the last two days trying to get wing running on Dir
>> >> >> >>>> 615,
>> >> >> >>>> Dir 825 and Ubiquity Bullet devices - all Atheros based.
>> >> >> >>>> I am building from the latest trunk openwrt code, using the
>> >> >> >>>> nightly
>> >> >> >>>> snapshots.
>> >> >> >>>>
>> >> >> >>>> I have not yet succeeded in getting any of these devices to
>> >> >> >>>> talk
>> >> >> >>>> to
>> >> >> >>>> any other device (I have two of each). The builds complete OK,
>> >> >> >>>> install ok, and wing seems to configure ok.
>> >> >> >>>>
>> >> >> >>>> Some of the symptoms I am seeing are:
>> >> >> >>>> no packets ever being sent or received on the wing-mesh
>> >> >> >>>> interface
>> >> >> >>>> starting wing, it is killed automatically within two seconds,
>> >> >> >>>> after generating a 1mb log file and filling up the ram. In
>> >> >> >>>> this
>> >> >> >>>> case,
>> >> >> >>>> the error message in the log file goes something like:
>> >> >> >>>> KernelTun: resource not available
>> >> >> >>>> bringing up the mesh (ifup mesh) and nothing happening -
>> >> >> >>>> nothing
>> >> >> >>>> in the kernel or system log files, no mesh log created,
>> >> >> >>>> nothing.
>> >> >> >>>>
>> >> >> >>>> Several people have mentioned that they have this running,
>> >> >> >>>> could
>> >> >> >>>> they
>> >> >> >>>> please let us know what version of openwrt, kernel, wireless
>> >> >> >>>> mac80211,
>> >> >> >>>> wing etc. they have built against.
>> >> >> >>>> The latest snapshot versions of the mac80211 have the tap patch
>> >> >> >>>> already installed.
>> >> >> >>>>
>> >> >> >>>> Thanks in advance
>> >> >> >>>>
>> >> >> >>>> Ross
>> >> >> >>>>
>> >> >> >>>> On 9 April 2011 10:06, Paul Adams<paul@pauladamsit.com> wrote:
>> >> >> >>>>>
>> >> >> >>>>> Hi,
>> >> >> >>>>>
>> >> >> >>>>> The D-Link DIR-825 has a Atheros AR7161 processor, 8mb flash,
>> >> >> >>>>> 64mb
>> >> >> >>>>> ram.
>> >> >> >>>>> It
>> >> >> >>>>> is known to run OpenWRT.
>> >> >> >>>>>
>> >> >> >>>>> It has dual radio - one Atheros AR9223 802.11 b,g,n radio and
>> >> >> >>>>> one
>> >> >> >>>>> Atheros
>> >> >> >>>>> AR9220 a radio.
>> >> >> >>>>>
>> >> >> >>>>>
>> >> >> >>>>>
>> >> >> >>>>> Bearing in mind the radiotap_rate patch for the ath9k cards -
>> >> >> >>>>> would
>> >> >> >>>>> this
>> >> >> >>>>> device be a good choice for running WING?
>> >> >> >>>>>
>> >> >> >>>>> It seems very similar to the RouterStation device, except that
>> >> >> >>>>> uses
>> >> >> >>>>> separate
>> >> >> >>>>> radios.
>> >> >> >>>>>
>> >> >> >>>>>
>> >> >> >>>>>
>> >> >> >>>>> Regards
>> >> >> >>>>>
>> >> >> >>>>> Paul Adams
>> >> >> >>>>>
>> >> >> >>>>>
>> >> >> >>>>>
>> >> >> >>>>> On Wed, 04/06/2011 at 6:12am, "Outback Dingo" wrote:
>> >> >> >>>>>
>> >> >> >>>>> Roberto,
>> >> >> >>>>>
>> >> >> >>>>> You can add Ubiquiti RousterStation / RouterStation Pro, and
>> >> >> >>>>> pretty
>> >> >> >>>>> much
>> >> >> >>>>> all
>> >> >> >>>>> their M units as they work
>> >> >> >>>>>
>> >> >> >>>>> and I have at least one of each in the lab loaded and running
>> >> >> >>>>>
>> >> >> >>>>> On Wed, Apr 6, 2011 at 3:42 AM, Roberto Riggio
>> >> >> >>>>> <roberto.riggio@create-net.org> wrote:
>> >> >> >>>>>>
>> >> >> >>>>>> Hi,
>> >> >> >>>>>>
>> >> >> >>>>>> I've added a few instruction about how to build wing using
>> >> >> >>>>>> the
>> >> >> >>>>>> upstream
>> >> >> >>>>>> openwrt
>> >> >> >>>>>> sources. You can find it here:
>> >> >> >>>>>>
>> >> >> >>>>>> http://www.wing-project.org/software:embedded
>> >> >> >>>>>>
>> >> >> >>>>>> please let me know if there are enough information to acieve
>> >> >> >>>>>> your
>> >> >> >>>>>> task.
>> >> >> >>>>>>
>> >> >> >>>>>> R.
>> >> >> >>>>>>
>> >> >> >>>>>> Il 06/04/2011 01:23, Outback Dingo ha scritto:
>> >> >> >>>>>>
>> >> >> >>>>>> On Tue, Apr 5, 2011 at 6:49 PM, Ross
>> >> >> >>>>>> Wakelin<ross.wakelin@gmail.com>
>> >> >> >>>>>> wrote:
>> >> >> >>>>>>>
>> >> >> >>>>>>> Hi
>> >> >> >>>>>>> Has anyone successfully compiled and run wing on a smaller
>> >> >> >>>>>>> embedded
>> >> >> >>>>>>> device?
>> >> >> >>>>>>> I'm looking to use Dlink DIR-615 as my test bed, and
>> >> >> >>>>>>> Ubiquity
>> >> >> >>>>>>> Rocket/Bullet devices
>> >> >> >>>>>>> for the live network. Both of these platforms are based on
>> >> >> >>>>>>> Atheros
>> >> >> >>>>>>> 9K
>> >> >> >>>>>>> cards, and
>> >> >> >>>>>>> things like OLSR, Batman and 802.11s run ok. I'm running
>> >> >> >>>>>>> the
>> >> >> >>>>>>> custom
>> >> >> >>>>>>> compiles
>> >> >> >>>>>>> now, but wondered if someone had already done this, and any
>> >> >> >>>>>>> pitfalls
>> >> >> >>>>>>> they
>> >> >> >>>>>>> came
>> >> >> >>>>>>> up against. I use OpenWrt trunk code with nightly updates
>> >> >> >>>>>>> from
>> >> >> >>>>>>> the
>> >> >> >>>>>>> svn.
>> >> >> >>>>>>
>> >> >> >>>>>> been building/loading and testing in the lab for months now,
>> >> >> >>>>>> all
>> >> >> >>>>>> seems
>> >> >> >>>>>> good to go now
>> >> >> >>>>>> itll run on those devices fine, we use ubiquiti also, youll
>> >> >> >>>>>> need
>> >> >> >>>>>> the radiotap_rate patch
>> >> >> >>>>>> for the ath9k cards also
>> >> >> >>>>>>>
>> >> >> >>>>>>> Thanks
>> >> >> >>>>>>>
>> >> >> >>>>>>> Ross
>> >> >> >>>>>>>
>> >> >> >>>>>>> _______________________________________________
>> >> >> >>>>>>> Wing mailing list
>> >> >> >>>>>>> Wing@create-net-ml.org
>> >> >> >>>>>>> http://diana.create-net-ml.org/cgi-bin/mailman/listinfo/wing
>> >> >> >>>>>>
>> >> >> >>>>>> _______________________________________________
>> >> >> >>>>>> Wing mailing list
>> >> >> >>>>>> Wing@create-net-ml.org
>> >> >> >>>>>> http://diana.create-net-ml.org/cgi-bin/mailman/listinfo/wing
>> >> >> >>>>>>
>> >> >> >>>>>>
>> >> >> >>>>>> --
>> >> >> >>>>>> --------------------------------------------------------
>> >> >> >>>>>> Roberto Riggio, Ph.D.
>> >> >> >>>>>> CREATE-NET
>> >> >> >>>>>> Network& Security Solutions for Pervasive Computing Systems
>> >> >> >>>>>> (iNSPIRE)
>> >> >> >>>>>> Senior Researcher
>> >> >> >>>>>> Via alla Cascata 56/D - 38123 Povo Trento (Italy)
>> >> >> >>>>>> e-mail: roberto.riggio@create-net.org
>> >> >> >>>>>> Tel: ( 39) 0461 408400 - interno/extension 708
>> >> >> >>>>>> Fax: ( 39) 0461 421157
>> >> >> >>>>>> www.create-net.org/~rriggio
>> >> >> >>>>>> --------------------------------------------------------
>> >> >> >>>>>> The information transmitted is intended only for the person
>> >> >> >>>>>> or
>> >> >> >>>>>> entity
>> >> >> >>>>>> to
>> >> >> >>>>>> which it is addressed and may contain confidential and/or
>> >> >> >>>>>> privileged
>> >> >> >>>>>> material. Any review, retransmission, dissemination or other
>> >> >> >>>>>> use
>> >> >> >>>>>> of,
>> >> >> >>>>>> or
>> >> >> >>>>>> taking of any action in reliance upon, this information by
>> >> >> >>>>>> persons
>> >> >> >>>>>> or
>> >> >> >>>>>> entities other than the intended recipient is prohibited
>> >> >> >>>>>> according
>> >> >> >>>>>> to
>> >> >> >>>>>> the Italian Law 196/2003 of the Legislature. If you received
>> >> >> >>>>>> this
>> >> >> >>>>>> in
>> >> >> >>>>>> error, please contact the sender and delete the material from
>> >> >> >>>>>> any
>> >> >> >>>>>> computer.
>> >> >> >>>>>> Le informazioni contenute in questo messaggio di posta
>> >> >> >>>>>> elettronica
>> >> >> >>>>>> e
>> >> >> >>>>>> nei
>> >> >> >>>>>> file allegati sono da considerarsi strettamente riservate. Il
>> >> >> >>>>>> loro
>> >> >> >>>>>> utilizzo e' consentito esclusivamente al destinatario del
>> >> >> >>>>>> messaggio,
>> >> >> >>>>>> per
>> >> >> >>>>>> le finalita' indicate nel messaggio stesso. Qualora riceveste
>> >> >> >>>>>> questo
>> >> >> >>>>>> messaggio senza esserne il destinatario, Vi preghiamo
>> >> >> >>>>>> cortesemente
>> >> >> >>>>>> di
>> >> >> >>>>>> darcene notizia via e-mail e di procedere alla cancellazione
>> >> >> >>>>>> del
>> >> >> >>>>>> messaggio stesso dal Vostro sistema. Trattenere il messaggio
>> >> >> >>>>>> stesso,
>> >> >> >>>>>> divulgarlo anche in parte, distribuirlo ad altri soggetti,
>> >> >> >>>>>> copiarlo,
>> >> >> >>>>>> od utilizzarlo per finalita' diverse, costituisce
>> >> >> >>>>>> comportamento
>> >> >> >>>>>> contrario ai principi dettati dal D. Lgs. 196/2003.
>> >> >> >>>>>>
>> >> >> >>>>>> _______________________________________________
>> >> >> >>>>>> Wing mailing list
>> >> >> >>>>>> Wing@create-net-ml.org
>> >> >> >>>>>> http://diana.create-net-ml.org/cgi-bin/mailman/listinfo/wing
>> >> >> >>>>>>
>> >> >> >>>>>
>> >> >> >>>>> _______________________________________________
>> >> >> >>>>> Wing mailing list
>> >> >> >>>>> Wing@create-net-ml.org
>> >> >> >>>>> http://diana.create-net-ml.org/cgi-bin/mailman/listinfo/wing
>> >> >> >>>>>
>> >> >> >> _______________________________________________
>> >> >> >> Wing mailing list
>> >> >> >> Wing@create-net-ml.org
>> >> >> >> http://diana.create-net-ml.org/cgi-bin/mailman/listinfo/wing
>> >> >> >
>> >> >> >
>> >> >> > --
>> >> >> > --------------------------------------------------------
>> >> >> > Roberto Riggio, Ph.D.
>> >> >> > CREATE-NET
>> >> >> > Network& Security Solutions for Pervasive Computing Systems
>> >> >> > (iNSPIRE)
>> >> >> > Senior Researcher
>> >> >> > Via alla Cascata 56/D - 38123 Povo Trento (Italy)
>> >> >> > e-mail: roberto.riggio@create-net.org
>> >> >> > Tel: (+39) 0461 408400 - interno/extension 708
>> >> >> > Fax: (+39) 0461 421157
>> >> >> > www.create-net.org/~rriggio
>> >> >> > --------------------------------------------------------
>> >> >> >
>> >> >> > The information transmitted is intended only for the person or
>> >> >> > entity
>> >> >> > to
>> >> >> > which it is addressed and may contain confidential and/or
>> >> >> > privileged
>> >> >> > material. Any review, retransmission, dissemination or other use
>> >> >> > of,
>> >> >> > or
>> >> >> > taking of any action in reliance upon, this information by persons
>> >> >> > or
>> >> >> > entities other than the intended recipient is prohibited according
>> >> >> > to
>> >> >> > the Italian Law 196/2003 of the Legislature. If you received this
>> >> >> > in
>> >> >> > error, please contact the sender and delete the material from any
>> >> >> > computer.
>> >> >> >
>> >> >> > Le informazioni contenute in questo messaggio di posta elettronica
>> >> >> > e
>> >> >> > nei
>> >> >> > file allegati sono da considerarsi strettamente riservate. Il loro
>> >> >> > utilizzo e' consentito esclusivamente al destinatario del
>> >> >> > messaggio,
>> >> >> > per
>> >> >> > le finalita' indicate nel messaggio stesso. Qualora riceveste
>> >> >> > questo
>> >> >> > messaggio senza esserne il destinatario, Vi preghiamo cortesemente
>> >> >> > di
>> >> >> > darcene notizia via e-mail e di procedere alla cancellazione del
>> >> >> > messaggio stesso dal Vostro sistema. Trattenere il messaggio
>> >> >> > stesso,
>> >> >> > divulgarlo anche in parte, distribuirlo ad altri soggetti,
>> >> >> > copiarlo,
>> >> >> > od utilizzarlo per finalita' diverse, costituisce comportamento
>> >> >> > contrario ai principi dettati dal D. Lgs. 196/2003.
>> >> >> >
>> >> >> >
>> >> >> > _______________________________________________
>> >> >> > Wing mailing list
>> >> >> > Wing@create-net-ml.org
>> >> >> > http://diana.create-net-ml.org/cgi-bin/mailman/listinfo/wing
>> >> >> >
>> >> >>
>> >> >> _______________________________________________
>> >> >> Wing mailing list
>> >> >> Wing@create-net-ml.org
>> >> >> http://diana.create-net-ml.org/cgi-bin/mailman/listinfo/wing
>> >> >
>> >> >
>> >
>> >
>
>
No comments:
Post a Comment